Labculture® Class II Type A2 Biosafety Cabinet
  Containment and Protection
  Cabinet Airflow
  Sentinel Microprocessor Control
  Cabinet Construction
  Engineering Details
  Technical Specifications
  Purchase Specifications
Labculture® Class II Type B2 Biosafety Cabinet
  Containment and Protection
  Cabinet Airflow
  Sentinel Microprocessor Control
  Cabinet Construction
  Engineering Details
  Technical Specifications
  Purchase Specification
 
Working Safely In Your Biological Safety Cabinet
Free Posters Available from Esco Biotech
Biohazard Safety Cabinet Classess
A Guide to Biosafety And Biological Safety Cabinets
Comparative Study of Cabinets
Comprehensive Performance Testing at Esco
 

North America
Esco Technologies, Inc.
2940 Turnpike Drive,
Units 15-16,
Hatboro, PA 19040, USA

Toll-Free: 1-877-479-3726
Phone: 215-441-9661
Fax: 215-441-9660
usa@escoglobal.com


Asia-Pacific
Esco Micro Pte Ltd
21 Changi South Street 1
Singapore 486777

Tel: +65 6542 0833
Fax: +65 6542 6920
mail@escoglobal.com

     
 
Robust construction and enhanced safety features qualify the cabinet for the most demanding laboratory applications. The cabinet is fully assembled and ready to install and operate when shipped.
  • The interior work area is formed from a single piece of stainless-steel with large radius corners to simplify cleaning.
  • The cabinet work zone has no welded joints to collect contaminants or rust.
  • All stainless steel work surfaces are accessible for cleaning.
  • Tray components lift and remove to provide easy access and encourage surface decontamination.
  • A recessed central area and stainless steel drain pan channels spills and prevent liquids from entering the lower filtration and blower systems.
  • The drain pan is flush with the side walls to eliminate concealed or hard-to-clean spaces.
  • There are no screws in on the front or sides to trap contaminants or complicate cleaning.
  • Optional service fittings are offset for easier access.
  • External plumbing is concealed behind trim panels to maintain aesthetics.
  • External surfaces are coated with Esco Isocide antimicrobial coating to protect against surface contamination and inhibit bacterial growth. Isocide eliminates 99.9% of surface bacteria within 24 hours of exposure.




  
     
  Integrated sash proximity contacts sense sash position, serve as an interlock for the UV lamp, and activate an alarm if the sash is improperly positioned.
  • The magnetic switch eliminates the chance of mechanical wear and tear typical of a mechanical switch.
  • The back of the sash can be easily cleaned by removing the sash track cover and swing up the sash glass.
  • The sash is counterbalanced for smooth and light sash moving operation.
  • The counterbalance locking mechanism is inherently safe; it locks the counterbalance in place if either of the 2 cables is detached. The sash cable and cable clip have rated strength of more than 6x the weight of the sash window of the largest Labculture Class II cabinet (1.8 meter/6 ft model)
  • The safety glass maintains containment if the sash is accidentally broken during cabinet operation.
 
     


     
 
All exterior painted surfaces are powder-coated with Esco Isocide, an antimicrobial inhibitor to minimize contamination. Isocide is integrated into the coating substrate and cannot wash out or diminish by repeated cleaning. Performance results are available upon request. Contact Esco or your Esco Sales Representative for details.
 
     


   
  The LB2 cabinet is engineered for comfort, utility value and safety.
  • The 10° angled viewing window and narrow profile front grille improves reach into the work area.
  • The instant-start 5000k fluorescent lamp operates on an electronic ballast to reduce heat, improve comfort and conserve energy.
  • The lamp delivers uniform lighting to the work surface for greater comfort, reduced glare and improved productivity; see Technical Specifications.
  • The front armrest is raised above the workzone to improve comfort and to ensure that the operator’s arms do not block the forward airflow perforations.
  • The optional adjustable support stand provides work surface height control.
  • The frameless sash eliminates operator’s line of sight blockage
  • A generous sash opening allows for easier access into the work zone, provides ample room for transferring of small equipment (See Specifications.)
  • The sliding window can be fully opened to insert and remove larger instrumentation and equipment.
   
 

The Esco triple-wall design creates a Dynamic Chamber plenum which surrounds contaminated areas with negative pressure, preventing the possibility of contamination from leaks in filter seal, gasket or cabinet structure. The third wall conceals utilities. 		 


     
  All components meet or exceed applicable safety requirements.
  • Each cabinet is individually factory tested for electrical safety.
  • Documentation specific to each cabinet serial number is maintained on file.
  • UL Listed for USA and Canada.
  • Certified to the US standard NSF / ANSI 49 for Class II biohazard cabinetry (refer to Standard Compliance table at the top of this page for the full list).
  • Contact Esco or your Sales Representative for site preparation information; see Electrical Specifications.
 
     


     
  The Labculture cabinet is warranted for 3 years excluding consumable parts and accessories.
  • Each cabinet is shipped with a comprehensive user’s manual complete with a report documenting all test procedures.
  • Additional IQ/OQ/PQ documentation is available upon request.
  • Contact your local Sales Representative for specific warranty details or documentation requests.